What are these oil flanges?

[RonRonTSI]

Im having trouble figuring out what oil flanges these are. I want to know if anybody can tell me what they are or where I can order them.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

I posted a picture of the fitting because it matches the bottem gasket but I dont need that large of a fitting because that is for the inlet. The outlet is my main concern which is the gasket on top. Can any one help me out?

 

[r1991_4g63t]

theyre in the felpro kit for the turbo gaskets for our car

 

[RonRonTSI]

I need to know what fittings I need so I can finish my oil supply and return.

 

[bane3d]

I know STM sells them for $24 and $4.

STMDSM -10 AN Oil Drain Fittings

STMDSM - Oil Outlet Gasket - GT Series

d

 

[RonRonTSI]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Thats not right. I need the fitting for the bigger on to run my oil return from the turbo. The one that you have posted is the smaller on I have posted. That is used for my inlet.

 

[RonRonTSI]

I need to know the oil drain style.

 

[snowborder714]

I don't get what you're asking.

Are you making custom oil feed/return lines for your turbo? Are you using the stock lines but need new gaskets?

 

[RonRonTSI]

Okay on my oil pan I have a -10an fitting I dont have one on the drain side of the turbo because I dont know what style fitting I need. I dont need a gasket, I have the gaskets. the top gasket in the pictures shows the gasket for the drain. I dont need the gasket, I need someone to tell me the style fitting I need to match that gasket. Once i Have that fitting I will be able to run a hose from that fitting to my oil pan completing the drain line.

 

[snowborder714]

Is this what you're looking for?
EXTREME PSI : Your #1 Source for In Stock Performance Parts - Billet Aluminum Oil Drain Fitting : -10 AN Male

 

[RonRonTSI]

yes that is what I need but I dont know what style it is. for example: garrett gt, mitsu, garrett pte, or bullseye

 

[snowborder714]

So you don't know what turbo you have?

Is the car still running the stock turbo? If it's an aftermarket, are there any markings or numbers on it? Maybe a picture of it?

 

[RonRonTSI]

its some unkown turbo thats why I am having trouble.

You must be logged in to view this image or video.

 

[snowborder714]

I would call up Extreme and see what they suggest. Your best bet might be to take measurements of the flange area and see if someone at Extreme can match it up with one of the fittings. Basically you're just looking for one that will seat properly, since you can redo the bolt holes if necessary.

 

[RonRonTSI]

its not threaded that why i need a flange type fitting.

 

[snowborder714]

My last post may have been confusing. I understand it's not currently threaded (although, tapping it may be another option for you and then get a metric to AN adapter). But you obviously can't run a 16g flange for that large of a turbo because the oil return area will be different. So you need to see which of the ones they offer is closest to your turbo. It may be that none of them work and you have to tap it.

 

[RonRonTSI]

yea I was trying to get the flange because the turbo is mounted and the car is about done. I thought that it would have been easier to have asked. You would think someone would know on tuners.

 

[Detective Coating]

Throw some pictures up of your feed and return holes on your turbo and we might be able to help you a little better.

 

[RonRonTSI]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

the 2 top ones are the drain, thats what I need. The one on the bottem is the inlet.

 

[RonRonTSI]

here are some measurments

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[big_d]

I don't really have any input but here is another thread on it.
http://www.dsmtuners.com/forums/newbie-forum/224432-biagio-turbo-what.html

 

[RonRonTSI]

I know the thread. Thats before I had my own account. Thats also my thread.

 

[RonRonTSI]

I still cant find it maybe they are only made for that turbo. I guess that will lead to getting one custom made. Shouldnt be to hard, I just wanted it to be a part I could order so I could get it asap.

 

[Burnett03]

Ebay/off brand turbo's FTL. Maybe call the turbo maker "balagio" or whatever and ask them. I don't see the point in gettting this fitting, the turbo will only last a week tops anyways.

 

[RonRonTSI]

its not ebay...its a company in brazil that has been around for 40 years biagioturbo.com .there is threads on it.