The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Possible Vaccum leak?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

eder-loco

15+ Year Contributor
133
0
Feb 19, 2006
pasadena, Texas
So this about 2 weeks ago. i parked my car. Due to Ike Hitting Houston, it ran fine, idle fine. everything Good as golden.
This afternoon i push it outside, battery was dead. well it starts to idle at 1800rpm.
i mess with the biss screw and Nothing. And the idle does not move.
So i look around and nothing. everything seems just fine. TB is new, Sensors were just fine before.
but i did notice that my brake reservoir was leaking a bit, Because i had moved it to fit my FPR. So i did my research and found that there can also be a Vac leak in the break System?
If so Where? While the car idles at 1800RPM, i would start stepping on the brakes back and forth and the rpms start to go up and down. from 1400rpm to 1800rpm.

Any ideas?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top