2G how to check for fuel pressure

[deviousgst]

how would i check for fuel pressure..and also when i do would i know if i have a stock fuel pump or no?
thanks

 

[weldtuner]

This link has some good pressure spec info http://www.dsmtuners.com/forums/tuning-engine-management/198174-stock-fuel-pressure-2g-why-afpr.html?highlight=2g+fuel+pressure as for testing-you can pick up one of these JEGS 41015 - JEGS Acura/Honda Fuel Pressure Gauge Kits - JEGS click on instructions and it shows you how to install, no more messing with testers. As for the pump you would need to remove and take a look heres how2G AWD fuel pump install hope these help

 

[68442]

I need to check mine also. I was just going to buy this kit and install it at the return line. If this won't give a good reading please advise! Thanks

Harbor Freight Tools - Quality Tools at the Lowest Prices

 

[weldtuner]

That tester would work fine, but using it on the return line will just give you a zero reading. There is no pressure on return side after regulator, you want to test fuel at the fuel-rail inlet side. I have a tester similar to the one you mentioned, I just cut my rubber hose after the filter and inserted the tee fitting to check the pressure. When I was done I used a brass push-lock fitting and 2 hose clamps.

I reccomend using the gauge and fitting b/c its cleaner and whenever engine is running you just pop your hood and look at it.