Is this the right 14b Install kit?

[Dready]

You must be logged in to view this image or video.

Does that look like all that is needed to install my 14b on to my 2g?

Any thing else i might need?

Thanks

 

[Detective Coating]

Yupp, that is all you need. You can use your T-25 coolant lines with a little fanagling. That sorta look like a cheap kit though. Also, doesn't look like the J-pipe is tapped with a pressure source so you might have to do that if not.

 

[wishnfor4g63T]

Although It's a good idea to tap the J-pipe for a mbc source, not everyone does it. Also have to agree the kit doesn't look like it's that great. But it will work. I have upgraded from the t-25 to the 16g so i know where your at. Be ready to have some copper lines and some rubber houses for the coolant/oil lines if your using them instead of new lines. It's a weekend job so have fun!

 

[xdsmlaser93x]

i had trouble with my lower intercooler tube when i switched over to the 16g, my j-pipe dumped over to the driverside of my cross-member, i had to get a 90 degree coupler off of my 1g parts car and use a small piece of pipe that i had welded a bead on so the thing didnt blow apart on me.

 

[Dready]

What do i need to do to the stock coolant lines to make them work?

What are the rubber hoses and copper lines for?

 

[Dready]

And the kit was $90 brand new..so i'm not complaining. It should work.



also....thank you for the replies.

 

[clockworktoy]

I wouldn't trust that oil line at all, ive heard horror stories of people having these cheap oil lines failing and causing engine fires along with blowing up turbos. Other than that everything else seems to be fine.