Greddy Turbo Timer Error Message

[ApexVIII]

well my car died so i jumped it, and now my Greddy turbo timer is reading some kind of a message, it lights up, and it looks like of like a back wards C then a O the a 5 so like C05

any ideas? maybe when i jumped it, it fried the TT?

EDit: actually it reads out something like a E05 (or E0S)\

here is a picture

You must be logged in to view this image or video.

 

[GSpikeX]

I would just unplug it and try to set up your time you had before and see what it does. maybe it just needs to be reset.

 

[ali]

try to reset.

 

[ApexVIII]

yea i tryed unpluging it. i can only turn it on and off(it only light up and shows the message does not keep the car running)

when i got home i shut the car off, it showed the E0S message and the car was still running, i let it run for like 30sec befor i started taking the dash appart to get to the pulg to unplug it so the car would shut off.

 

[ali]

take the ground off and leave it off for maybe a day.

 

[ApexVIII]

any one esle?

 

[ApexVIII]

up again ????????

 

[ApexVIII]

NotToTheTop??

 

[93_tsi_fwd]

Not much help here but I have the same problem with this greddy TT for the last 2 or so months. Its been on and off of the car uninstalled and when I put it back, it reads the same thing. It never counts down. my error code is 3 backwards ''C'' or ] ] ]

I would also like to know how to fix this.

 

[ApexVIII]

i have seen other people having the same problems...

 

[ApexVIII]

nobody.... really?

 

[ove_98 TSI]

no bumping allowed

as for your problem unplug the timer for a few minutes then try pressing the power, select,time buttons all at the same time to see if it responds

 

[ApexVIII]

no bumping allowed

as for your problem unplug the timer for a few minutes then try pressing the power, select,time buttons all at the same time to see if it responds

asking if no body has this similar problem is not really bumping....

anyways i googled it and other people have gas similar problems but no one knows how to fix it

maybe it cant be fixed

and now the greddy is going belly up i think im screwed


here is a picture

You must be logged in to view this image or video.

 

[Lofty]

Disconnect, plug back in, and try pressing the p and s button or the p and t buttons to change the settings.

Edit: Here's a manual for you
http://www.greddy.com/img/PHP/products/pdf/685.pdf
Edit again.
If you look at the harness of the turbo timer it should go to its own little 4 wire black plug (this comes with the timer out of the box). The other end goes to your ignition barrel. Anyway undo that plug and you'll have the 4 prongs. Use a test light or even better a multimeter and test that you have the correct power going to each one. One should be constant 12volts, the other igntion power, the other is accesories power and the last is negative.

The negative is black, the red is constant, and the green and blue are accessories and igntion. Not too sure which ones are which

That's all the information I can give you. Best of luck.

 

[clean96GST]

asking if no body has this similar problem is not really bumping....

anyways i googled it and other people have gas similar problems but no one knows how to fix it

maybe it cant be fixed

and now the greddy is going belly up i think im screwed


here is a picture

You must be logged in to view this image or video.

Yes asking people if they have similar problems isn't bumping, but doing it over and over and saying things like " to the top" is.

 

[ApexVIII]

Yes asking people if they have similar problems isn't bumping, but doing it over and over and saying things like " to the top" is.

damn i get all these noobs trynig to pwn me.




but yes i have tryed upluging it and pushing all the buttons the only button that will respond is the power button.

i guess its time to crack it open and see if anything on the board is messed up

:/

 

[VPrime]

Should have bought an ebay brand!


Kididng

 

[LTUDSM]

internal ERROR ,in your case you got to send it back to Greddy,and have them fix that error,or your best bet would be get a proven turbotimer like HKS.I had problems with my 4 greddy turbotimers.finally i bought a HKS and im happy ,that i did that Greddy electronics are JUNK.

 

[ApexVIII]

internal ERROR ,in your case you got to send it back to Greddy,and have them fix that error,or your best bet would be get a proven turbotimer like HKS.I had problems with my 4 greddy turbotimers.finally i bought a HKS and im happy ,that i did that Greddy electronics are JUNK.

ooo i see is that what you got also the same message?

the TT came with the car so i did not buy it.

i guess that greddy is bankrupt not much i can do

 

[TurboATM]

I have had problems with this tt, that code did pop up in the middle of my deal.

mine was starting to count up very very fast, and was killing my battery. after unpluging it and putting it back in, that code poped up, but went away after unplugging again.

after putting it back in, it still counts up as fast as it can, but won't keep the car on when u turn off the key. I have tried sooo much, pressed very combo of buttons, rewired, and even kept it off for over a week and reinstalling, but nothing...

 

[Chrispy0530]

Oh man, I recently bought one from craigs list the other day and this same error came up when I finally hooked it up . He claimed it was working and was originally selling it for $35 but I got it bumped down for $5 so it's not much of a loss.

( he doesn't answer my calls and his line was suddenly d/c'ed )

 

[2bclutch]

I have the same issue. I Jump started my car and there's the error, the car will continue to run, I had to pull the motor fuse to kill the engine. I'm going to take it out this weekend and test it with the Multimeter. I will probably rip it open as well to see if anything has been fried on the circuit board.