The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Help Wiring Diagram

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

problematicdsm

Probationary Member
6
0
Jun 24, 2008
Comox,
Im looking for some JDM wiring diagrams for a 92 eclipse. i have a haynes manual and wiring diagrams for USDM but not JDM...PLEASE HELP
 
im wiring up the engine i bought a jdm 6bolt to replace my blown 6bolt and seeing as the connectors are different and some have one wire more or less i need diagrams
 
Yeah, unless you're doing something unique or specific with your new motor, you should be able to just transfer sensors from your old and you'll be golden :)

Sensors such as:

Knock sensor
ECU Coolant Temp Sensor
Oil Pressure

etc . . .
 
Im looking for some JDM wiring diagrams for a 92 eclipse. i have a haynes manual and wiring diagrams for USDM but not JDM...PLEASE HELP

There wont be a jdm wiring diagram for an eclipse, they were never sold in japan, the connectors are different because you have a 90' style "jdm" engine in a 92' car.

the cas is square vs. triangle correct?

most of the other plugs should work, or arent necessary anyway.
 
Yeah, unless you're doing something unique or specific with your new motor, you should be able to just transfer sensors from your old and you'll be golden :)

And much happier in the long run. Make sure you take the whole throttle body, fuel rail, coil pack and power transistor along with the wiring harness from the 6 bolt so you don't get stuck with the '90 style junk.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top