Help Gauge A/f Connection!!!

[WhoTippedMyCoW]

Hello,
I recently hooked up my a/f gauge to the blue wire near the heatsheild. When i connected the 2 splices wires together and connected them with the a/f wire i must of not tighted the clamp thingy tight enough and the a/f fell out. Well i went to pull the 2 connect blue wires up and they came apart. They are barly together. Im curious if they come apart will my car be messed up or what will happen!! i cant get it fixed rly till tommorow.

 

[viperlp01]

Its just an o2 sensor. The thing will not blow up. Just get it fixed as soon as possible.

 

[WhoTippedMyCoW]

So it will be ok to drive to work tommorow and home? like 30min

 

[Hollywood77]

Do you have a soldering iron?
Couldn't you just solder them up real quick? 5-minute fix, right?

 

[MadScientist92]

Just get it fixed you may get a CEL though until then. Also be aware that AF guage is not to be used for any sort of tuning. It's just a pretty light show.

 

[WhoTippedMyCoW]

i have no tools on me really, there at my dads house. Whats a CEL?? i will get it fixed tommorow when daylight.

 

[WhoTippedMyCoW]

CEL - Check Engline Light nm ^^ figured it out myself but its ok to drive it my main concern.

 

[Hollywood77]

Yeah, you can drive it, but keep that repair on the top of your list. Address it as soon as you can.

 

[WhoTippedMyCoW]

Ok, Thanks for all the help guys!

 

[spyderturbo007]

Just for future reference, it's much easier to hook up that gauge to the O2 sensor wire under the dash at the ECU.

 

[silver bullit]

Just for future reference, it's much easier to hook up that gauge to the O2 sensor wire under the dash at the ECU.

Cant you use the pin on the passenger side harness. I thought that is what its for...

I got one that was like that and it worked.

 

[Defiant]

And it's even easier to listen to us, and not bother with a damned A/F (Always Fluctuating) gauge.

I'll bet you ten bucks it won't float in your nearest river. Come on, ten bucks. Go for it. You could buy a pint of gas.