2G AEM wideband

[nebs]

So i bought a gsx with the wideband already installed and it doesnt run right. Do i have to put another bung(or watever its called) in the downpipe and run the stock 02 sensor as well as the wideband sensor.(im also throwing a check engine light cause i dont have it)

 

[95TalonOwner]

you still need a stock front o2 sensor connected tif you don't have one.

 

[haioku-rocket]

x2.

stock ecu needs to still see the narrow band signal from the stock one to function properly.

 

[nebs]

ok so i take the wideband o2 sensor and put my stock on back in..whre do i put the other wideband sensor?

 

[95TalonOwner]

Weld another bung onto the downpipe for it.

 

[nebs]

Thats all i have to do?

 

[greddyturbo19]

Weld another bung onto the downpipe for it.

THAT IS CORRECT. !!! i think any muffler shop thats local to you will do it.

 

[nebs]

sweet! thanks guys. Im sure ill be posting up somemore questions soon.

 

[Supa Dexta]

36" from the turbo is what it calls for, Make sure there are no leaks before it though.

 

[agarcia892003]

http://www.dsmtuners.com/forums/articles-electrical-wiring/266345-aem-uego-wideband-install.html



note that that one is placed where the 2nd o2 sensor goes. this will work but you might still have a cel. i will rather place it on the downpipe before the flex section and still run your 2 o2 sensors.

 

[haioku-rocket]

put mine right before the flex section. works fine.

 

[nebs]

so i took the aem sensor out for now and put the stock on back in..took it for a spin and im hitting 25 lbs and i could prob go higher but i dont wanna break anything. With the aem one i was hitting 10lbs off the wastegate