anybody w/500hp on stroker

[dsmerjosh]

anybody at all out there w/500hp on the stroker. Anybody with 2.3 at all. power# spool time on turbo?

 

[AshTsi]

Lots of peoples with 2.3's One place you could start is under members there is 1/4 mile times and dyno's. Good place to look and see what ##'s people are puttin to the wheels and what they are using to do it.

 

[Supa Dexta]

Plannin' high 500's in the next month or 2 here, depending on when I can get time to finish up. 2.3 with a borg s362 and meth.

 

[mitch26753]

I would say that atleast 40% of the people running strokers are over 500 hp.

 

[absolute_DSM]

I would say that atleast 40% of the people running strokers are over 500 hp.

With the right turbo. Some of us run them for road racing, with a moderate turbo for a quicker spool and about 400-450awhp.

 

[whitedawg]

I'm at 420whp at 15.5 psi with my 2.3. Should easily clear 600whp on race gas.

 

[vaboys2ndgen]

Is there a question you were looking for turbo, internals specific or just wasting space?

i'm going to pick up the motor from the machine shop in the morning.

2.3l nonturbo 1G block, 1G turbo head

manley valvetrain
brian crower camshafts 272s
ferrea bronze valve guides
ferrea valve seals

wiseco pistons
eagle hbeam rods

IPT built race trans w/ 3800stall

trying to switch turbo setup to a FP htadsm88 turbo should easily put down 500+ on pump no problem.

 

[kittay]

I'm going 2.4 Eagle H beams, Ross pistons, Eagle forged crank for bottom end and gt4202

 

[DamionGST]

I have a 2.4 with 500hp on pump gas.

 

[TunaTalon]

740 View Profile: twicks69 - DSMtuners.com
732 http://www.dsmtuners.com/forums/members/40-psi-blk-dsm-75448.html
716 View Profile: kiggly - DSMtuners.com
707 View Profile: ecoli - DSMtuners.com
653 View Profile: bus - DSMtuners.com
627 View Profile: nukefission - DSMtuners.com
617 View Profile: TurboSpoolinIns - DSMtuners.com
603 View Profile: rdrkt - DSMtuners.com
560 View Profile: GreddyGst - DSMtuners.com
516 View Profile: gixxerdrew - DSMtuners.com
503 View Profile: Mitsutalon - DSMtuners.com
500 View Profile: nanokpsi - DSMtuners.com
All from DSM Dyno Sheets Database

 

[mitch26753]

740 View Profile: twicks69 - DSMtuners.com
732 http://www.dsmtuners.com/forums/members/40-psi-blk-dsm-75448.html
716 View Profile: kiggly - DSMtuners.com
707 View Profile: ecoli - DSMtuners.com
653 View Profile: bus - DSMtuners.com
627 View Profile: nukefission - DSMtuners.com
617 View Profile: TurboSpoolinIns - DSMtuners.com
603 View Profile: rdrkt - DSMtuners.com
560 View Profile: GreddyGst - DSMtuners.com
516 View Profile: gixxerdrew - DSMtuners.com
503 View Profile: Mitsutalon - DSMtuners.com
500 View Profile: nanokpsi - DSMtuners.com
All from DSM Dyno Sheets Database

Damn! you put alot of time into that! But yeah there are alot of strokers making over 500hp, like i said before that probably 40% are! If not 40% then its damn close and the one that aren't making that much are in the 400's!