The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Large Greddy fmic HP?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jetgsx

Probationary Member
15
0
Feb 17, 2008
belmont, Massachusetts
How much hp can you make with the large Greddy fmic? is 500-550whp possible?
 
that intercooler wont take you to those numbers if thats all you have from stock, you'll have to do alot more upgrades than just a fmic to reach 500hp but if you get your numbers up there that intercooler will hold up to it yea.
 
this fmic made 450+whp with the tiny piping that comes with the kit, i was just wonering if it's capible for more power? or look for a diffrent fmic?
 
The intercooler isn't there to "make" power. The intercooler's purpose is to efficiently cool the air flowing though it, to decrease iat's and make the engine less prone to knock. If you are less prone to knock then you can increase your boost. Hence making more power. I'm sure that intercooler could potentially withstand higher airflows on a high hp engine. And if the piping is too small then you could always upgrade the piping. If I remember correctly Greddy's fmic have some long piping. Depending on how the intercooler's in/out caps are positioned, you could just buy the intercooler and make or buy a short route piping kit with larger pipes if this is an option. Dejon tool has a nice short route piping kit that I use and I am very pleased with it. You have a lot of options with fmic's.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top