BOV Install Help

[nightstocker99]

So I won a greddy BOV from ebay but when it got to my house it didn't have the hoses to hook it up. I am not sure where they go either. I have looked in the site for a picture of where the 2 hoses go can anyone take a picture and show me.

 

[GofaST4life]

two hoses....there should be one hose to the IM, and the other to recirc.

look at my avatar for a pic, its not close up but youll get the idea

 

[blkwidow]

Is it a Greddy RS or Type S? The reason I ask is because you usually have to buy the recirculation tube. Hopefully that item was included in the purchase.

 

[GofaST4life]

in used my stock recirc tube

 

[blkwidow]

Sorry I should have said that about the Greddy RS. See where the metal tube is connected to the BOV, you wouldn't be able to get a hose over it. Thats why I mentioned the recirculation tube. That outlet screws off and thats where you screw the recirculation tube on.

 

[GofaST4life]

crap my bad, yeah, you need to buy the adapter, i got mine for $20 on eBay, then your set...

 

[nightstocker99]

i am pretty sure now that i look at it, it is a knock off. but it has i bung on the top and on one the bottom and then there is also the vent tube that i will recirculate. it looks like a Greddy RS but its not made but greddy.

 

[nightstocker99]

You must be logged in to view this image or video.

It looks like this kinda BOV

 

[blkwidow]

Well the outlet goes to the intake. Greddy has the 2outlets but both are on the back instead of one on top and one in the back. I think the top one goes to the IM. The extra one in the back is left alone, at least that is how mine is. Do you have a flange for it?

 

[GofaST4life]

I have the GReddy Type RS (pictured above)...its not a knock off, and was easily installed...im not trying to be an a## but BOV installation really is very simple...

its a universal idea that there is one nipple to go to the IM and outlet to recirc, although some BOV's do not have the recirc option, because you can set up the car as blow through, were recirc is not needed cause your venting to the atmosphere.

 

[blkwidow]

I have the GReddy Type RS (pictured above)...its not a knock off, and was easily installed...im not trying to be an a## but BOV installation really is very simple...

its a universal idea that there is one nipple to go to the IM and outlet to recirc, although some BOV's do not have the recirc option, because you can set up the car as blow through, were recirc is not needed cause your venting to the atmosphere.

Agreed. Very easy to do. Look at how your stock one is connected.

 

[nightstocker99]

Well the outlet goes to the intake. Greddy has the 2outlets but both are on the back instead of one on top and one in the back. I think the top one goes to the IM. The extra one in the back is left alone, at least that is how mine is. Do you have a flange for it?

Yes it fits to the greddy flange just fine. It is just shity because i dont have any of the hardware for it. but I will make it work.

SO what i am saying is that there are three places to hook up tubes. One back to the intake mani one to the intake pipe because it recirc and the other goes to some place.

 

[dsmconvict]

Have any pics of the bov for reference? Run one line to the IM then the other is your recirc tube.

 

[Jrgunn5150]

I just bought a car missing the BOV, is the nipple on the top a vacuum line? Or is that the adjustment?

 

[talonalex92]

I just bought a car missing the BOV, is the nipple on the top a vacuum line? Or is that the adjustment?

Its an adjustment. You do realize your car is missing that becuase its N/T right? Or thats what your profile says at least?

 

[Jrgunn5150]

Its an adjustment. You do realize your car is missing that becuase its N/T right? Or thats what your profile says at least?

Different car. I bought a Talon TSI yesterday

 

[talonalex92]

Different car. I bought a Talon TSI yesterday

Ohhh! Nice. I must have missed that if you mentioned it. If not, you were about to have a lot of people rag on you. haha