Small 16g with Greddy hard piping...

[DSMnOOb00]

Will the greddy hard pipes need a L bend pipe to hookup to a 16g turbo with a J-pipe? or will it bolt up just fine? I'm thinking that the greddy hard pipes are for the stock t-25 turbo and other turbos like it with the outlet facing the stock smic...

And if a L pipe or Silicone Elbow Hose is needed, what size reducer? I know the greddy pipes are 2.25.. but the j-pipe is smaller right?

thanks!!!

this is for a 2g eclipse

 

[siceclipse]

you will need the RRE j-pipe or the SBR which is the RRE unit.


thats for direct no pain in the ass bolt on and drive.

You can just get a 5 dollar stock j-pipe from a 14B and make the rest of the piping yourself.

 

[DSMnOOb00]

Lame! Well I dont know witch way to go now... I want the greddy uicp with the SSR licp to fit the jpipe... but I dont want to pay the extra 100 bucks for the licp I wont use... know anyone that juse sells the greddy uicp for 100 or so??

 

[siceclipse]

forget the greddy pipe.

just get it from ebay to save a buck or for quality parts that FIT what you need go with Dejon tool.

DEJON | Powerhouse

For FULL piping, that I have and recomend,

UIP-2gA
UIP-2gB

LIP-2gB


no promises but if you CALL and say you want to order all 3 ask for a deal and see what they say.

 

[DSMnOOb00]

Well I seem them, but it also says "These fit the modified side mount IC" witch mean what? That I need to upgrade my SMIC too?

 

[DSMnOOb00]

NM I was looking at the 1gen stuff.. The site has almost everything I was looking for... Can I just get the uicp and the licp with out the upper S pipe UIP-2gB and just use the stock stuff for now? (untill I get more cash, then im getting that and the MANDREL BENT THROTTLE BODY ELBOW)

 

[siceclipse]

yeah you can do 2/3rds of it if you want

but trust me
that mandrel "S" pipe to the throttle body is AWESOME!

 

[DSMnOOb00]

Thanks guy! I'm Callin them today and ordering...