Name that am intake manifold

[white90gsx]

Does anyone know who makes this intake manifold because I need to buy a 1g tb flange for it?

 

[mygsx2120]

Looks like the Full Function manifold, there is a thread on them in the vendor section. Take a look at it and see if they are the same.

 

[white90gsx]

Couldnt find it

 

[big_d]

Typed it into google, and found this in 30 sec... http://www.dsmtalk.com/forums/showthread.php?t=187937 I believe its made to fit the bbk throttle body they offer...big_d

 

[turbosax2]

Doesn't look like the full function to me. The one in the picture necks down at the throttle body flange.

 

[white90gsx]

I went to the web site fftec.com but they dont offer intake manifolds.

 

[turbosax2]

They JUST released the intake manifold so it's not on their site yet.

 

[white90gsx]

I need a 1g tb flange.

 

[96_charcoal_tsi]

To me it looks like one off of ebay. My friend has one for his boosted civic and it looks almost identical to that. It also necks down by the throttle body flange.

 

[99gst_racer]

Yeah, definitely looks 'similar' to the Full Function manifold, but I believe that one is just a no-namer off of eBay.

If it's got a mustang TB flange, you can simply have one of these machined. I made this in a friends machine shop one night. My Magnus was flanged for a 75mm TB and I wanted to use my 1G TB. Works great.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[white90gsx]

I couldn't find any similar one on ebay. And I don't have the resources for me to make it but I can call around.

 

[pitbull419]

Yeah, definitely looks 'similar' to the Full Function manifold, but I believe that one is just a no-namer off of eBay.

If it's got a mustang TB flange, you can simply have one of these machined. I made this in a friends machine shop one night. My Magnus was flanged for a 75mm TB and I wanted to use my 1G TB. Works great.

That looks great.
And what might I ask are you using for a gasket between the flange and adapter flange?

 

[99gst_racer]

That looks great.
And what might I ask are you using for a gasket between the flange and adapter flange?

I'm using a basic Mustang TB gasket between the plate and the manifold flange, and then a standard Mitsu gasket between the TB and the adapter plate.

 

[95tsiawd6blt]

looks like an old school buschur or extreme motorspots manifold