snow per WI wiring - MAF source?????

[90gst_sean]

I'm almost finished, this is all that is standing between me and 4 months of work! I just cant seem to find any good info on which wire to tap into for the yellow (maf source) wire off my Snow performance 2D meth injection controller box. It needs a Hz signal from the maf and I don't know what wire to splice into!

All I've found is a reference to the 3000's yellow/blue wire. I don't even have a yellow/blue wire.

I'm running a 2G maf in a 89GSX. So I guess ether car's instruction will work. I can still see both 1G and 2G wire covering colors.

please help, I'm about to role around on the ground kicking... Thanks

 

[90gst_sean]

OK, I may have answered my own question. But, still could use some confirmation. I couldn't just sit here when I could be DSMLink logging down the freeway!

I found a pin out diagram for both 1G and 2G MAFS's. I remembered using it when doing my 2G conversion (helpful then, and helpful now; thank you!).

It looks like I'll need:
#3 white/black OFF 2G -OR- #?2? Green/Blue OFF 1G

Am I rite?

 

[steve]

It sounds like you need to tap into the MAF signal so 2 or 3 would be correct depending on where you tapped. (the 2G plug or the 1G harness)