fried safc?

[clipse-T]

Is there anyway a SAFC can fry if i wired it incorrectly? I tried to install a SAFC first then i thought it didnt work so i got a SAFC2 and on both the buttons would light up and the screen wouldnt come on. Is there any way that i have it wired incorrectly for them to be fried because of it? Any help is appreciated.

 

[mini zilo]

Did you correctly wire the brown wire (ground) closer to the ECU then the black wire (ground) further from the ECU? That's the only thing I can think off that could be wired incorrectly for somethings to work and not others.

 

[Mikelb]

You could have possibly wired it wrong.

Check to make sure you have followed the directions to a T. http://www.ecanfix.com/~aclifford/tree/images/index/mods/superafc/afc.jpg

Also, you might want to pull the AFC's apart. Look at the screen, if you see a burn spot, the screen is no longer any good. This could be caused by wiring the AFC while the battery was connected, or an improper install (usually a bad ground).