The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

my car

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ttsupraman93

Probationary Member
16
0
Jul 31, 2005
Pasadena, Maryland
hey i have a 1993 eagle talson awd tsi i am putting on a to4e i believe its a 60 mm trim i was wondering if i get 650 cc inj, safc, fmic, and 255 fuel pump if it be safe for my car LOL or if she will explode what do you guys think:talon: :talon:
 
with a turbo that large you should consider getting bigger injectors then what you said. Also instead of the safc you might want to get a dsm link setup instead. with the bigger injectors and dsm link you will have a lot more room to grow with your setup. You also didnt mention a fuel pressure regulator in your list of parts you will need one of those too.
:talon:
 
yea how much are the dsm links and were can you find them ive been looking for one? and like what 750 inj
 
dsm link is a few hundred dollars. plus you will also need a laptop to run the software and an eprom ecu to allow for changing the cars parameters. With this the safc will not be needed
:talon:
 
dsm link is a few hundred dollars. plus you will also need a laptop to run the software and an eprom ecu to allow for changing the cars parameters. With this the safc will not be needed
:talon:

Oops:D
I meant that you dont need the AFC when you have DSMlink.
 
Um yea i was reading your mod list in your profile and you said none right now. You plan to put these mods but dont you think you should at least put the basics on first? ie. exhaust, intake, bov? Unless you already have those and just not stated yet.
 
Um yea i was reading your mod list in your profile and you said none right now. You plan to put these mods but dont you think you should at least put the basics on first? ie. exhaust, intake, bov? Unless you already have those and just not stated yet.

You might have to get a intake to fit around a .60 trim(the stock one might fit?) I would recommend the exhaust ,and you have a1g BOV that should work just fine for you.
 
Make sure you get a nice regulator and gauge such as a aermotive. You do not want to get a cheep ebay one on this or it will make tuneing a PINA. You will need one that raises your fuel pressure at a 1:1 ratio under boost.
 
yes i have most of the stuff such as exhaust and ordering intake was just wondering what other stuff would be needed
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top