when you put a 6 bolt in a 2g, do you use the 1g wiring harness, or 2g wiring harness

[90-DSM-TSI-AWD]

when you put a 6 bolt in a 2g, do you use the 1g wiring harness, or 2g wiring harness? thanks.

 

[steve-o_95_GST]

You use your 2g harness with a little modification... as seen here: http://www.roadraceengineering.com/1gcasin2g.htm I also have a write up in the tech section about the whole swap, if you search for it.

 

[MyÜberFastGSX]

I used the 2g wiring harness. You also have to get a 1g cam sensor and put it on a 2g head.

If you haven't bolted the head on yet, don't you have to drill out the head bolt holes in order to fit the 12mm 1g block bolt holes.

 

[MyÜberFastGSX]

I used the 2g wiring harness. You also have to get a 1g cam sensor and put it on a 2g head.

If you haven't bolted the head on yet don't, you have to drill out the head bolt holes in order to fit the 12mm 1g block bolt holes.

 

[Nicks2319]

Use a 1g head.

http://www.magnusmotorsports.com/tech/index.htm

 

[NvDiS]

when you put a 6 bolt in a 2g, do you use the 1g wiring harness, or 2g wiring harness? thanks.

so yea i had to bring this one back from the dead..im wondering though will the 1g/6-bolt wiring harness plug up the the 2g ECU and run the motor like so?

 

[steve]

I'm wondering, will the 1g/6-bolt wiring harness plug up to the 2g ECU and run the motor like so?

No the 1G wiring harness won't plug into the 2G ECU.

Use the 2G wiring harness and make adapters or rewire those parts of it that need to go to different sensor than what the 2G had.

 

[tEi Vp DsM]

first off if your doing a 6 bolt swap,go with a complete 6 bolt 1g set up head and block.use everything as if you were just swapping just a motor,use all your 2g harness and ecu.but you will definitly need to swap out some sensor plugs(easy just some minor rewiring).my 6 bolt swap took no time to do....good luck

 

[My2gGSX]

I used the 2g wiring harness

 

[NvDiS]

Thanks a lot fellas I figured it didn't my buddy bet it his pay check it would .. guess I got some extra christmas money......dropping the motor in this weekend ...let yall know how it goes