Need help with stock oil gauge. Please help.

[wcpierson]

my stock oil gauge hasnt worked for some time now and i want to fix it. I have a couple of loose wires hanging down by the oil filter housing so i was hoping someone might be able to explain where they should be plugged in to or if someone could take a picture of the way they should be that would be a big help....I believe one wire is yellow and the other wire is blue if that matters at all...please someone help me out with his

 

[Auto RS T]

Although I have a 90 filter housing the wiring is still the same. I had to take two pictures to get both the sensors.

The yellow wire goes to the oil pressure switch, and the blue wire ( shielded in the 2nd pic) goes the the pressure sending unit for your gauge.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[wcpierson]

thankyou so much.....do you know where i can get the part number for the oil sending unit? also is there anywhere i can get new plugs for the end of the wires mine are pretty shot and covered in oil and dirt or can I just cut the wire and crimp on a new female plug

 

[antlip]

Contact a mitsubishi dealer for the end. I replaced mine where it attaches in your second picture. I got it for less than 10 bucks. Should just clip all together. I didnt cut or soder any wires.

 

[wcpierson]

Contact a mitsubishi dealer for the end. I replaced mine where it attaches in your second picture. I got it for less than 10 bucks. Should just clip all together. I didnt cut or soder any wires.

do you remember what part name or number you told the dealer that you needed?

 

[antlip]

I have a 95 gsx, if the wire will work for your car I will look for my recipet for you.