gauge mounting solutions.

[TurboTJ]

I am ordering an AEM UEGO (wideband) and an AEM boost controller gauge. The two mounting solutions I am looking at are the epod and the instrument cluster bezel. Will these gauges fit? I was worried that they might be to deep. Also, does anyone have any pictures of the Instrument cluste gauege bezel installed? Does it go in easy? Here are links to the ones that I am talking about
http://www.extremepsi.com/store/customer/product.php?productid=17718&cat=700&page=1
http://www.dsmtuners.com/forums/showthread.php?t=247450

 

[95blackGsTurbo]

I would go with the instrument gauge bezel. I ordered the ATI ePod and they have sent me the wrong one TWICE and are being difficult about a refund. I shipped it back to them but haven't heard from them since. I have seen the right ePod on a DSM and the fitment left something to be desired along with the gauge's being in odd places compared to that picture. Not to mention you have a lot of ugly wires hanging from your steering column.

 

[sureshot971]

Ick for the epod the other one looks much more fresh

 

[Blue95GST]

def the instrument gauge bezel much cleaner look and keeps it somewhat sleeper from outside eyes

 

[TurboTJ]

thanks for the response
Does anyone know if the instrument gague bezel covers up anything? (fuel level, oil pressure?)

 

[calreef18]

I have the instrument cluster bezel off of ebay, its ok for the money but if you can, get a name brand one. The fit isn't perfect, and the autometer gauges I put in I had to bend back the metal threaded prongs on the back so they'd sit flush. Otherwise, it looks good and no gauges are blocked.

 

[ndsti]

Go with the autometer dash configuration, you won't be dispointed. Yes, calreef18 is right you have to bend the threads or cut them off to make autometer guages fit perfect. I love my set-up and would not go to the a-pillar mounting again!

 

[Nonrml4]

Be aware that its a total pita to get everything wired using the bezel pod. I have the autometer bezel and I cant get the top two screws to thread due to the fit of the peice in general. Just a fyi. I def like how it is.. just know that before you go to install it.