axle support

[XxSiRhCy6PxX]

Alright so here is the deal. In the process of replacing my driverside axle seal, i found one of the bolt broke into the bolt and when i went for the other one it also snapped! How will it drive without it in for a while and does anyone have any ideas on how to fix it.

 

[Black Venom]

Don't drive it. Use an ez out, or weld a nut onto the broken bolts and wrench the rest out.

 

[tearintalon1]

dont wory your not the only one it happened to me i atually snaped the head of the bolt off. i ended up drilling it out and replacing the bolt. if you can drill it use an easy out. if theres enough to grab you can heat it and use a pair of vice grips

 

[91 Turbo Mitsu]

Here is another option. If there is a boss that sticks out on the side of the block you can take a cuttoff tool and cut a notch in the bolt for a screwdriver. Then take a torch and heat it up and turn the bolt out. it has worked for me in the past with broken motor mount bolts. Travis

 

[XxSiRhCy6PxX]

Thanks for the ideas, but deng thats gonna be a tough spot to work with.