The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Best ait-intake/manifold fo rmy dsm: ?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JHJames20

Probationary Member
7
0
Apr 29, 2006
Augusta, Georgia
I have the 1993 eagle talon 2.0L non-turbo model and was wondering what is the best air-intake to use since the sensor and all.also is their any non-turbo intake manifolds for powergains ? i only have found turbo ones.and i really wouldn't want to spend my money on ebay items for my car just because i wouldn't want any problems i want atleast something worth doing all this work on my car.thanks.and i've odne all my searching.just want some input from some others on here.:thumb:
 
Get an air intake that puts the filter outside the engine compartment. Getting a "short ram air" intake just sucks in hot air from under the hood and doesn't really net any hp gains. Try to find one that puts it as near the stock location as possible if there isn't one for outside the engine bay. As far as intake manifolds go you won't really see too much of a gain from one. You can get the eBay OBX one that might get you a couple hp but you could just port you throttle body and intake inlet and it would do about the same. Try looking in the Tech Guide for upgrade path.
http://dsmtuners.com/sub.php?page=1gntupgrades
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top