For all 2g owners with Carbon Ti exhaust for GST

[turbodsm18]

Could someone please help a fellow dsmer out. I am in need of a picture of how the piping routes underneath the rear axle on the HKS Carbon Ti exhaust. As of right now, my 3in SS piping goes over the rear axle and im am going to an exhaust shop tommorow but I need a picture to help explain how to reroute my piping. It gets annoying when everytime you take off your exhaust rattles, so ive had enough and decided it was time to change things up a little bit. Some one Please Help. It really is greatly appreciated.

 

[fulanititoo8198]

Well you don't need to change how your exhaust is routed. Just get some hangers welded in place. When I had my exhaust done the stock hangers held it up fine no rattling. So maybe you just had it installed wrong or one of them broke off. You don't have to many options to route it with fwd. You can do under but then you'll have clearance issues for the most part.

 

[turbodsm18]

Both of my hangers are being used and it is installed correctly. I know i will lose ground clearance but my car isnt lowered and i like the look of how the muffler would slant if I rerouted it. Its hard trying to squeeze 3in piping through the small gap from the rear axle and the underbody of the car. any body else have some pictures they can help me with.

-Kevin-

 

[punkak2]

This is on a gsx that i found...

<a href="http://photobucket.com" target="_blank"><img src="http://i45.photobucket.com/albums/f97/punkak2/carbonti-underview.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>


hope it helps

 

[turbodsm18]

You realize I posted this thread more than 5 months ago right?????

 

[Killa_dsm]

You realize I posted this thread more than 5 months ago right?????

Did you get up getting it fixed?

 

[turbodsm18]

Did you get up getting it fixed?

No I didnt, the shop that I went to didnt carry ss piping so I said #### it. The car has sat for a little bit and im just getting around to driving it a lot now. Soon, I will finish it though.

 

[Killa_dsm]

Because I have the same problem. The shop that did mine when over the top of the rear suspension. I'm planning on having mine change sometime when I have extra cash. But I saved a couple pics a while back from someone else's exhaust. So you can use this as reference.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[turbodsm18]

Because I have the same problem. The shop that did mine when over the top of the rear suspension. I'm planning on having mine change sometime when I have extra cash. But I saved a couple pics a while back from someone else's exhaust. So you can use this as reference.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

I cant see any pics......I can see that you posted them from quoting you but they are not showing up for me.