TB bolts

[the_skin_eater]

Search must be down or something.....


But how do you take out/install new bolts into the TB. Mine right now only has two on there, and I can get two more easly, just dont know how to get em in or out. Thanks.

 

[hewhoisknot]

Do you mean the studs? Just get a vise grip and lock them on tight and work them out.

BUN

 

[the_skin_eater]

ya, the studs.... Thanks.

 

[fwdturbobov1996]

Be careful not to ruin the threads if you plan on re-using the studs

 

[steve]

If you don't want to chew up the shank like vice grips tend to do you can get two nuts put then on and tighten then together then back the stud out using them.

Steve

 

[Auto RS T]

Yeah, definately go with the jam nut, vice grips will ruin the shank.

You just take the two nuts that came off the studs and run one down on the threads, then run the next one down and tighten them against each other.

To get the stud out turn the nut furthest from you counterclockwise and it should break free.

Once you get the stud out just loosen the front nut from the rear nut. Then repeat for the second stud.

 

[the_skin_eater]

didnt even think of that...Definatly goin that route...

Just need to find me some TB nuts....