The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Which water injection kit?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ive been looking into these systems, a lot and this one looks like the best http://water.lovehorsepower.com . I like it because of the solenoid and the accumulator tank. This tank is the key to success, and this is because it regulates the pressure for the best performance. Also the tank makes is so the pump does not have to run all of the time. Check out the site they have videos too that show the nozzles in action.
 
Snow performance has a nice looking kit. As for out of the choices that were on the site you provided I would say the 150psi stage 2. It will allow you to up 30psi in the future. PM donmagicjuan he has the devils own kit, he is currently writing a tech article up on it as we speak, and he will most likely have his thoughts and comments on how it has worked so far for him. Good luck on this desision glad to see you made the choice to go with meth/alky/water injection, and make sure you dont get one off eBAY. These kits work great if they are made properly, but I have heard of the eBAY POS ones not injecting a steady amount, and seriously messing with the engine...but this is the eBAY ones only, I have heard nothing but good things and the Devils Own kit, Snow's kit, and enginerunups. Also I would invest in an extra large holding tank, Im getting a huge one so I can DD all day, and have 100 octane gas, so I will run 28+ all day long.

Dustin
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top