GReddy to HKS Adapter Flange

[dizasta72389]

Okay, after searching around and find nothing, I have come here.

Has anyone seen or heard of an adapter for the HKS SSQV Blow Off Valve So I can use my Greddy Piping with the HKS SSQV BOV?

I don't want to have to cut up or weld my piping that I have now. I just want to use an HKS SSQV Blow off valve on GReddy Piping without cuting or welding pipes.

Thank you for reading and I appriciate your inputs.

 

[Alucards_blood]

I've never heard of such a thing. I've also got a very similar uicp set-up. I have the greddy pipes and I'm using the SQV. What I did was had a welding shop cut off and re-weld an SQV flange. The flange cost me about $30 and the shop charged me $20 bucks. You can find cheaper HKS type flanges but I went for the actual HKS brand flange. My intercooler pipes and BOV all work fine together. Hope that helps.

 

[dizasta72389]

I actually heard from someone I talked to that I could get a 1G to HKS Adapter and just drill holes to match up with the GReddy Piping. Do you think that would work? Anyone ever try it?

 

[Alucards_blood]

You can try Machv.com or DSMparts.com. I know they carry a few flanges that connect to the stock intercooler pipes. But, if you hold the HKS bov and the Greddy intercooler pipe side-by-side, there's no way they'll fit from drilling some holes. I think you're mistaken about the drilling part. If I remember correctly it was for the 1g guys wanting to use a Greddy bov that would have to do the drilling. Well, g'luck.

 

[Alucards_blood]

Could this be it?

http://www.dsmparts.com/customer/product.php?productid=440&cat=&page=1

 

[dizasta72389]

Yes thats it, But im surprized no one has or seen a GReddy to HKS adapter like that.

 

[brute]

If you go to http://dsm.dejonpowerhouse.com/, go over to the left. Go to the bottom category called "BOV-Misc-Tools" under the "All Mitsubishi" category. They have 1g --> GReddy, 1g --> HKS, 2g --> other brands, etc. There's no adapters from HKS --> GReddy.

I'd suggest just buying a section of intercooler piping with the flange on it (http://cgi.ebay.com/ebaymotors/GREDDY-BOV-2-5-INTERCOOLER-FLANGE-PIPE-MR2-LANCER-NEON_W0QQcmdZViewItemQQcategoryZ33742QQihZ019QQitemZ290017295109QQrdZ1), two couplers (http://www.slowboyracing.com/more.php?id=1296&), and you should be set.

 

[dizasta72389]

My buddy tried that and his leaked like crazy. So I wouldn't want to do that. Cause I just called him and asked if he still had his and he did but, he said it leaked and wasn't worth doing. All Though its a cheap way its not a good thing. I think I would have to buy the whole pipe.

 

[iceman21221]

i know this is old but just in case someone else searches. here is a company that sells the adapter greddy to hks.

Login : VMS Performance - Volvo Custom High Performance Auto Parts For Sale

Cheers.....