The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2g AWD fuel pump rewire

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nessuno

15+ Year Contributor
95
0
Jul 3, 2005
Lancaster, New York
Okay, here's the deal. I've tried searching the boards, and I also tried other research like VFAQ. I can't find any pictures of how to rewire the fuel pump harness on my awd tsi. The only thing I have found are for fwd 2g and awd 1g and the harnesses are different. Can anyone point me in the right direction? I just need some pictures, detailed instructions, something. I was in the middle of doing this yesterday when I realized that the harness looked different than the pictures I found.
 
really simple. on ## fuel pump connector when u take the cover off the assembly theres two heavier gauge black wires. the black wire with the grey stripes around it is the one ## to splice into. from the relay included put the ground wire to the car somewhere. i found a good ground behind the speaker panel. the big heavy cable goes to ## positive battery terminal and should have a 30amp fuse included inline. the other two connections on ## relay will be to connect to either end of the wire u sliced on the fuel pump connector
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top