Fastest Standard Big16g on a 2g Setup?

[Boosted98gsx]

I'm currently running a big16g w/ a bunch of mods. I was wondering if anyone on here knew the specifics of the fastest 2g w/ a standard b16g's (not evo) modifications. For some reason i think there is a kink in my setup someplace. here is a site of my mods:

http://www.geocities.com/boosted98gsx/MyCar.html

I'm currently adding on one of the DVDT FMIC's. My old FMIC (the one i had when i ran that 12.6) was a spearco 2-178 core that was very poorly thought out and using a long route piping.

The time that's posted was w/ a 35lbs/min max airflow (says dsmlink) and i had it tuned to a 10.8:1 w/ a 23* max timing curve. Should i be having lower ET's and higher traps than that slip?

Thanks.

 

[92awddsm]

If you work on your launch, you will get better times. You should be able to pull at least 1.82 60' times. I bet you could get 12.30 or .40 with just some practice.

 

[blcknspo0ln]

shapeGSX probably has the fastest 16G 2g out there.. he runs low 11's [ 11.3xx I think ] and flows ~40 lb.min

 

[Boosted98gsx]

shapeGSX probably has the fastest 16G 2g out there.. he runs low 11's [ 11.3xx I think ] and flows ~40 lb.min

He's also running an Evo3. I asked for standard.

 

[Boosted98gsx]

Also, would i NEED race gas to get into the low 12's on a big16g? I'm going to be needing to max out its airflow (supposed to be at 22-23 psi), so do you think i'll need racegas, or will i be ok on pump?