The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

H&R springs vs Skunk2 Coilovers.....

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BC_DSMer

Probationary Member
14
0
Jun 17, 2003
Ok i need some opinions on this one.

I picked up a complete set of tokkiko non-adjustable shocks however i have a set of skunk2 racing coilovers and a set of H&R springs w/ 2" drop.

Which setup should i use?

1. Tokkiko shocks with H&R springs

2. Tokkiko shocks w/ perches cut with the skunk2 coilovers

A friend of mine told me that the skunk2 coilovers will eventually ruin your tokkiko shocks. I really don't wanna change my shocks any time soon!!

I would really like to use the skunk2 setup for the reason of being able to adjust the height of the car but not at the cost of a new set of shocks!

Thanks in Advance
 
I have H&R springs on my 1G and i absolutely love them. The ride quality is top notch for upgraded suspension. I'm not sure how good the skunk 2 coilovers are but my experience is that unless you get a full blown coil over setup like Tein, the coil overs will blow your shocks out.
There are so many crappy "coil over" kits that are just a cheap coil and a poorly machined perch. So i'd say don't hack up your shocks and use the H&R springs. Also think how often your going to get in there and adjust the ride height. hope that helps some.

-Tom
 
Thanks for the tip. Anyone else here that strongly agree that coilovers eventually would blow your shocks?
 
Originally posted by BC_DSMer
Thanks for the tip. Anyone else here that strongly agree that coilovers eventually would blow your shocks?

there's no reason why coilovers would cause your shocks to blow. maybe if you choose the wrong spring rates or cheap struts/shocks, but the same goes for regular lowering springs as well.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 1g Used 1991 Turbo Engine Control Harness, Auto, with ABS
    Used engine control harness for a 1G turbo, automatic with ABS vehicle, replaced any broken...
    • 19Eclipse90
    • Updated:
    • Expires
  • For sale '90 Laser turbo
    115,000 miles. Bought new, lovingly cared for. Very low miles in recent years, mostly in storage...
    • GregPLT
    • Updated:
    • Expires
  • For sale 2g factory torque converter
    2g Auto GSX factory torque converter
    • pottersgst
    • Updated:
    • Expires
  • For sale JFH REAR
    JFH Auto LSD REAR
    • pottersgst
    • Updated:
    • Expires
  • For sale 420A OEM 2G DSM 420a Fuel Injector Wire Harness
    $15 + shipping/fees PayPal, Zelle, Venmo, Apple pay
    • Stizzydrew
    • Updated:
    • Expires
Back
Top