The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

how low before camber kit?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ok well if those people with the prokit's are right, which i hope they are, i dont need to worry about a camber kit right now because i am getting tein springs which give the same length drop. thanks for the help:dsm:
 
Personally, I would use a camber kit on any drop in excess of 1". Factory camber just isn't that adjustable, so an alignment alone can only do so much. IMO, it's alot cheaper to buy a $100 camber kit than a $4-600 set of tires.
 
I would have to agree with Jerky. I actually am still @ stock height right now, but installed front and rear camber kits (perhaps because I'm an Autox junkie. . .but that's besides the point) I also didn't want to excessively wear out my new set of tires. Plus when I get around to droping an inch or so, I'll be ready to adjust the camber.

If you're looking for a front or rear kit, check this link out- took me about 2 weeks to find a good deal on Ingalls.

http://www.dsmtuners.com/forums/showthread.php?s=&threadid=66292
 
Ok prokit is more than 1.3 The thing people have to realize is that Eibach's sag like crazy. With a prokit you will see more of a 1.5< drop after about a month. You will need a camber kit if you drop a car at all. Even an inch you will need one. I have H&R sport springs with 1.7 drop in the front and my toe was fine but my camber was way off!!! You can go alittle while on the prokit with no camber correction. I would say a couple months but you will notice some tire wear especially in the rear.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1g Chassis harnes fuse box
    • 92AWDHX40
    • Updated:
    • Expires
  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
Back
Top