The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Doors will not unlock!?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Schwebe101

10+ Year Contributor
290
0
Nov 10, 2011
Defiance, Ohio
Hey guys, so I have been searching the forums for ever now and I can not find anyone who has the same problem I do. First of all, when I put my key in the drivers side door and turn it to unlock I have to keep it in the unlock position to open my door. If I take it out, it will lock again. Well today, I was running behind for school so I went out to get in my car and my key wouldn't unlock my door? I have power locks forget to mention that. Okay so then I tried to go to the passenger side to get it. I turned the key and struggled with it to get that one unlocked. So once i was in, i manually tried flipping the lock, it fought back! It kept locking!? So I tried using my buttons, Id hit unlock and it'd flip to unlocked then snap right back to locked! So I couldn't get in my car! Finally I ended up having to pull the manual lock back and open my drivers side door from my passenger seat.

Side note* Also whenever I take my key out of the ignition my car locks and there is nothing I can do to unlock it! What is going on here, someone please help me! I look like an idiot spending 20 minutes to get my door unlocked! :cry:
 
Usually when I used to run into theat issue, it was a sticking door lock actuator.
Either that or some other mechanical issue pulling the lock mechanism back to the lock position.

Pull fuse # 10 / a 10 amp fuse in the interior fuse block & unpower the power door lock circuit.
99% positive that fuse powers nothing else but power locks.
That should give you a little relief for now.
 
Last edited by a moderator:
Usually when I used to run into theat issue, it was a sticking door lock actuator.
Either that or some other mechanical issue pulling the lock mechanism back to the lock position.

Pull fuse # 10 / a 10 amp fuse in the interior fuse block & unpower the power door lock circuit.
99% positive that fuse powers nothing else but power locks.
That should give you a little relief for now.

Yes, that would have been smart to do...now that i think of it :hmm: Buuut now when I push my unlock or lock buttons on either door nothing happens? There is a click from the console area where my radio is but the doors make no noise at all. I have manual locks at the moment now....without pulling any fuses...:toobad:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top