welding a crack in transfer case...

[domenico_169]

So for the past couple weeks my wifes n/a automatic 95 talon has been leaking tranny fluid all over. Finally get it on a hoist and take the bitch apart (the car) and we thought it was just the output shaft bearing leaking, BUT NO, we found a crack in the transfer case. Instead of going out and finding a new one, you think its ok to bring it to a shop as one entire piece and just have them weld over it?

[silver bullit]

Its a car recall for that, take it to a dealership, even if it has been done they have to service it. Check vfaq.com for ore info.

[Black91TSiAWD]

Originally Posted by domenico_169

So for the past couple weeks my wifes n/a automatic 95 talon has been leeking trany fluid all over. Finally get it on a hoist and take the bitch apart (the car) and we thought it was just the ouput shaft bearing leaking, BUT NO, we found a crack in the transfer case. Instead of going out and finding a new one, you think its ok to bring it to a shop as one entire piece and just have them weld over it?

your wifes n/a automatic 95 doesnt have a transfer case.

*Unless someone made an AWD 420a, or put a n/a 4g63 in an AWD car.* And either scenario is unlikely.

[silver bullit]

Originally Posted by Black91TSiAWD

your wifes n/a automatic 95 doesnt have a transfer case.

*Unless someone made an AWD 420a, or put a n/a 4g63 in an AWD car.* And either scenario is unlikely.

Duh i dunno why this did not click?

Take a pic of what you are talking about.

[Defiant]

It's a cracked bell housing from the transmission bolts being run loose.

Yes, you can have it welded.