pressure plate bolts?

[oztofrdm]

hey i was looking in the service manual and everywhere else, and i couldnt find the specs on the bolts. can someone please help me out. By the way this would be for a 1g gsx with the 6bolt

 

[poorboyj]

Torque spec's?

25 foot-pounds, and be careful, any more than that will break those bolts off.

Jay

 

[oztofrdm]

sorry i was asking what size bolts they where so i could buy new ones, i figured since i have spent so much money on the other components why use the stock bolts with 100k on them

 

[pneumo]

8x1.25 16mm long. Or if you have an aluminum flywheel, use 20mm long bolts.

 

[oztofrdm]

Thank you SO much. its the act streetlight, so do i need the 20mm

 

[pneumo]

Thank you SO much. its the act streetlight, so do i need the 20mm

You're welcome. The ACT flywheel is steel, so the stock length will be fine. Don't forget new lockwashers and loctite.

 

[spyder97gs]

8x1.25 16mm long. Or if you have an aluminum flywheel, use 20mm long bolts.

Are these the same for the 2G? I'm doing an AT>MT swap and need these bolts. I'm using a stock galant flywheel on my spyder. Thanks..

 

[pneumo]

Yes, 1G and 2G use the same bolts.