About to swap my 17c for pte 50 trim

[sarge]

Hey, I've been running 21psi on my frank jr 17c which is clipped and ported, and i recently just got in the PTE 50, so i was wondering what levels of boost(i'm thinking maybe 15-18psi here) i can safely run on a stock 2g block, I'm hoping to make around 350hp or so

i have 550cc injectors, and a walbro 255 and the apexi S-afc

your thoughts would be appreciated

 

[LandoAWD]

Originally posted by sarge
Hey, I've been running 21psi on my frank jr 17c which is clipped and ported, and i recently just got in the PTE 50, so i was wondering what levels of boost(i'm thinking maybe 15-18psi here) i can safely run on a stock 2g block, I'm hoping to make around 350hp or so

i have 550cc injectors, and a walbro 255 and the apexi S-afc

your thoughts would be appreciated

Bigger injectors are in order. You can run 20 or so psi (or more, c'mon flock of 50 trimmers with 2Gs...help me out) on the block. Make sure you race a guy in a Laser, though.

 

[dthquazi1]

i know this is a little off subject but will you be selling the 17c?

 

[LandoAWD]

Originally posted by dthquazi1
i know this is a little off subject but will you be selling the 17c?

Please use PMs for this...Thanks.

 

[dthquazi1]

sorry...now i must add my 2 cents. I would get a maft to free up air potential. But other than that your block should handle it. In my opinion