got spark, no fuel

[yuzuha32]

i recently tried to install an safc in my car. after wiring everything up and adjusting all of the settings the car would not start. i decided that i was going to save toying with the safc till a day when i had more time so i unhooked all of the safc wires and pluged the ecu in as normal. the car still won't start. i have spark but no fuel. i checked all the wiring and everything appears to be soild. i have checked all of the fuses i can think of along with the ecu itself. everything is good. is there a way that i could have blown a relay or the fuel pump itself while removing the ecu and battery terminals. someone point me in the right direction i need to get my car running asap!!

 

[yuzuha32]

turns out that the fuel pump relay down by the ecu was knocked loose. i plugged it back in and everything works fine. probably knocked it out when i pulled the ecu out so this wekend i am going to hook the safc back up and see what happens.