16G w/install kit??

[chovis38]

I am looking to buy a 16G Turbo Upgrade with install kit. I am wondering, do I need to buy anything else, or do I need to just buy the 16G and install kit? The turbo I am referring to is the one at the top of the page.

Also, where can I find a FMIC the fits into the 95-96 Eclipse. I see all of thes FMIC's that are fit for the 97-99 Eclipse.

 

[-=TWITCH=-]

You will need to get some hose for the coolent feed line. And you will also have to dremel the J-pipe some you will see when you get it. Other than that the install is pretty easy.

TWITCH

 

[RamenPride]

10mm bolts to attatch the oil drain line to the turbo (not sure if they're included in 2G install kits, as I've never seen any mention of them.....)

 

[chovis38]

I am pretty sure that the 16G upgrade uses the same compressor housing, but what about the 18G? Does that use the same compressor housing as well. I don't want to have to get a custom turbo exhaust manifold to fit the turbo; I want it to be bolt on. That's one of the reasons why I want the 16G. Any feedback would be great!!

 

[Omega]

Why would you need new 10mm bolts? Use the ones from the old setup.

The one thing that REALLY pissed me off about the turbochargers.com kit was that it didn't come with the "L" pipe. I ended up buying one from RRE, but that is 2.25" dia. The J-pipe that comes with the kit was 2" I then had to buy an adaptor hose.

 

[abrxy3]

what about the SBR 2g big16g kit? doesnt that come as a complete bolt on?

 

[RamenPride]

Originally posted by Omega
Why would you need new 10mm bolts? Use the ones from the old setup.

because the ones that attatch the oil return line to the T-25 didn't fit (they were too big)