sensors on the firewall

[dsmtalontsi95]

I have a 97 talon and am looking into removing alot of things form the firewall. None are being used anymore but I left them pluged in so I wouldn't have any cell's. Can I remove them and not worry about it? I don't even know what the sensor's are but they all have vacum nipples on them which aren't being used. They are towards the drivers side and on the top of the firewall.

 

[rstchris]

Fpr solenoid, you don't need it and if unpluged it will throw a cell. If you want it gone you can wire a resistor to keep the light off.

 

[snowborder714]

You can use this site to figure out what sensor is what.
Virtual Tour of the DSM Engine Bay - 1G Visual Index

You can remove them if you don't mind having a CEL. Just keep in mind that if the car throws a CEL for a more severe reason, you'll never know unless you pull the codes on a regular basis.

 

[blcknspo0ln]

Whatever you do, DO NOT cut the blue 2 wire plug behind the battery.

 

[snowborder714]

You can cut it off if you solder and heat shrink/electrical tape the wires together.

 

[blcknspo0ln]

haha trust me, I troubleshooted (troubleshot? troubleshut? ) for 3 solid weeks on why my car was firing 2 cylinders to learn that I just hope no one has to go through that nightmare like I did!