any one no about the 4g15/4g63 swap

[oneg4g63400hp]

im swapping my 4g63 into a mirage how or can the tranny Fit into the mirage?help!

 

[2.0pwrdc50]

what tranny are you trying to use? one from a fwd tel? that one should work fine. not to sure the number of it tho. i know the km210 is what comes stock in the turbo c/m.. i think you can also use the km201.. be sure to get a fwd flywheel.

 

[InferiorWang]

there was a thread on a 4g63 into a mirage/colt/summit not too long ago. I'm not allowed to tell you to use the search but it might help. And when I posted the links to sites about the swap on the other thread, I found them all on google.

 

[DSM mechanix]

http://www.vysor.com/lancerproject.htm
http://mirage.fateback.com/turbo/body_turbo.html
http://seekthelight.jcsmp3s.com/mirage/4G63T_Swap.htm

the last link is the most helpful, even explains wiring...

 

[oneg4g63400hp]

its a 90 gst tranny going in there will it bolt up to every thing

 

[oneg4g63400hp]

its a 90 gst tranny going in there will it bolt up to every thing

 

[FourG63 97GST]

Well look who it is.
anyway there's a member here goes by "Starion" who did that swap. can message how for more info.

 

[2.0pwrdc50]

yeah the 90 tranny will work fine for you.. but you are going to have to use a fwd, if its the same as the 4g61 dust shield since it postions the starter in the right spot. not that sure but you might have too use the shifter bracket also.
http://www.4g61t.com/forum/