oil feed fittings

[ILLiCliPSE]

what size are the oil feed fittings at the turbo and at the oil filter. trying to make a custom stainless line in a hurry because stock hard line broke.... thanks!

 

[Batman™]

If I'm not mistaken they're -4 AN

 

[ILLiCliPSE]

edit******-4 an is not the threading on the turbo.. but a -4 an line should be used... what adapters are needed to screw into turbo and oil filter

 

[hopwoodp]

You will need the proper adapter fittings but yeah, a -4 an line is correct.

 

[ILLiCliPSE]

well ya i know 4 an is correct for an oil feed but i need to know the correct "adapters"

 

[hopwoodp]

well, since you are running a t-28, you have two possible options. 1. order the line from Road Race Engineering $70 or 2. From extremepsi - http://www.extremepsi.com/store/customer/product.php?productid=17630&cat=1007&page=1
or
http://www.extremepsi.com/store/customer/product.php?productid=17334&cat=1007&page=1