The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Injector Size Question and Brand Choice yet again.......

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Boostin GST

15+ Year Contributor
151
1
Aug 29, 2004
San Antonio, Texas
1. which brand injectors should i look toward and which brands should i stay away from.

I saw some precision turbo injectors for $260 for some 880s or 780s, my choice. any good reviews or bad reviews from their injectors?

2. what size injectors should i get. ill try to list all my mods since my mod list is way out of date

hmmm where to start.

pte 60-1
ported sbc cast manifold with turbonetics deltagate 2....just ordered mani.
2.5 stainless steel o2 housing with dump tube soon to be welded shut bc of externerl wastegate.
3 in megan downpipe
3 in tsudo catback
greddy fmic with upper and if i can make it fit new turbo then lower icp also
greddy type s
act 2600
forced performance intake with weaper r filter.
apexi avcr and safc
autometer gauges of course.
walbro 190
cant remember rest of shit.

k this is other things i have just ordered or im ordering within next few days after i decide on injectors.

getting dsmlink, walbro 255, fp version 2 cams., and afpr but dont know what brand.

so some 880s just bc i can and incase i feel like slapping my wet and intercooler kits? same price anyway.
 
I am running the pte 780's with my 60-1 and everything works well. Im sure others will tell you to go with a more expensive injector but if you want to stay in a budget, the pte's are fine. I would suggest going to an 880 because I have seen upper 90's idc with 30 psi and wish I had gone larger. And of course, the 255 is almost a must with injectors that large. As far as afpr, I would suggest going with an aeromotive.
 
thnx for info.........i figured might as well go 880s since its same price. itll be there just in case i ever need it is how i see it.
 
I just bought a set of 950cc's from ebay for $285. Delphi's, used by FIC & PTE. Replacing 750cc FIC's. Mark
 
My only complaint was that they were too small for my turbo and boost levels. I also had 650's and 720's that were delphi's. No problems. Mark
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
  • For sale 1g 1GB Eclipse Tail Lights
    1GB Eclipse Tail Lights $80 + shipping and paypal fees* not flawless but in very good shape...
    • jersygsx
    • Updated:
    • Expires
Back
Top