The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Oil Pressure Light

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cody D

15+ Year Contributor
93
1
May 26, 2004
Olds, AB, Canada
I am running a Turbonetics T3/T4 60 Trim, and every time I get into boost my oil pressure light turns on, or flutters on and off. The oil pressure gauge doesn't move from where it usually is.

The car feels fine, it has nice power, I'm only running it at 9 psi right now untill I'm sure nothings going to blow up on me.

I'm worried I'm not supplying enough oil to my engine or turbo.

Anybody experience this or have a suggestion to fix it?

Thanks.
 
maybe a loose connection at the sensor? Where are you feeding the turbo from? Oil level ok? My oil light came on too a while back but everything was fine. It was just a bad sensor. Too lazy to get a new one so mines just disconnected.
 
Gauge reads OK? Iwould replace the sending unit for the light. MAybe change oil too. `Filter could be bad. Just what I would do.Mark
 
if i were you i would get that checked out soon it might be coming on that you could be loosen pressure some were or it not holding it.i had that problem and i let it go and my engine went to hell.i would just double check what is the worst if you do it now it could be real bad later if you leave it in for while.
 
I guess I should have given a little more info, sorry, I just swapped heads two days ago and put the head off a 1993 onto the block from a 1990 using the stock head bolts from the 1990, at that time I changed the oil and put on a Fram filter.

I'm supplying the oil for the turbo from right by the Oil Filter, not from the head ;) .

I'll definately have to look for a loose wire, the only problem with that though is that the light ONLY comes on during full boost.

Thanks for the replys.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 2g ABS - Left side harness brackets
    Looking for the metal brackets for left side ABS wiring harness. Sensors not needed
    • Justin DuBois
    • Updated:
    • Expires
  • For sale 2g 2GB CAS Assembly ( Complete )
    2GB CAS Assembly ( Complete ) $85 + shipping and paypal feesYou must be registered to see element.
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Clock Spring, Wiper Stalk, Turn Signal Stalk
    2G Clock Spring, Wiper Stalk, Turn Signal Stalk $35 + shipping and paypal fees* removed from...
    • jersygsx
    • Updated:
    • Expires
  • For sale 4G63 2G Cylinder Head
    2G Cylinder Head $250 + shipping and paypal feesYou must be registered to see element.You must...
    • jersygsx
    • Updated:
    • Expires
  • Free 4G63 1G /2G ECU Connector
    Came with a parts car, 1GA Talon with a 2G ECU. Some wires look cut and spliced. I have no use...
    • Badge023
    • Updated:
    • Expires
Back
Top