need a little advice

[Killa95GS-X]

ok guys whats up i am going to be buying a new turbo, i was going to just get another t-25 but i want to get something better cause i want to kick this guys ass in a 04 turbo neon rt4 or whatever he beat me the other night but my turbo is so bad its going to give shit any second and i didn't want to race that night but any ways i was wondering what a good cheap setup is i was thinking a 16g with front mount and will i need any injectors i wont boost to high lick 15 at the most, i already have exhaust,intake,greddy bov,upper intercooler piping and boost gauge, oil pres, and air fuel ratio. if any one can give me a list of a good little setup you know enough to beat that dam neon! that is the only car i ever lost to exept a 350 z with exhaust intake and a few things. well let me know, thanks again. sorry to sound like a newbie but i am in a hurry.

nick

 

[Tomeek]

actually beating these neons is not so easy!!! there not just neons, they are the new GST's basically! well you should go with an EVO III since it is not much more $$$ FMIC and 550 and UP injectors, Walbro 255lph (HP), and Aeromotive FPR, and S-AFC. this should be a good setup with your existing mods

 

[Maglin]

Since you don't want to go over 15 PSI you don't have to upgrade your fuel system just yet... Just the E16G and the FMIC should make you a happy man at 15 PSI... You would be well advised to do a fuel pump rewire with 10 AWG wire.... That will help you out with fuel in the upper RPM bracket... Until I picked up my 1000cc injectors I used a Stock pump rewired with a B&M Command Flo to up the fuel pressure to 44 ish PSI. It made my 450cc injectors into 510's and I didn't see over 95% DS with my 14B @ 18 PSI....

 

[Defiant]

PERIODS

ARE

FREE.​

Use all you want. We won't run out.

Otherwise:

This is NOT Advanced 4G63t Tech

And

WE DON'T DO BENCH NOR STREET RACING HERE.