What manifold will fit the Greddy 95-99 TDO5H-18G kit?

[Grinder]

What manifold will fit the Greddy 95-99 TDO5H-18G?

Cant seem to find any info about it.

The kit comes with an adapter that makes the "greddy 95-99 TDO5H-18G kit" fit the orginal manifold.

Please need info.

 

[4G64T]

i need some help with this too i cant find a picture of the adapter anywhere i have a tdo5h-18g off of the civic si kit that i want to put on the pacesetter manifold but i cant find any pics or info that can help

 

[Steve93Talon]

just buy a TD05H turbine housing with a mitsu flange. You can choose from either a stock 6 or 7 cm one (about $50-150 used), a new 7cm one - including the EVO3 housing (like $250), or a bullseye ($220). Then it'll bolt right up. and lose the pacesetter manifold.

 

[SpoOLxExO]

No fear.

The greddy 18g has a mistubishi-flanged turbine housing.

Any manifold will fit! (1g, 2g, EVOIII, custom "Mitsubishi turbo flanged" headers, etc.)

The adapter was GReddy's attempt in making the turbo bolt on as far as water pipe clearance. The nice thing is, the adapter isn't nessisary at all, as the turbo bolts right up!

Have fun!

 

[Steve93Talon]

The greddy 18g has a mistubishi-flanged turbine housing.

Read his post, he has a Greddy 18g from a Civic Si kit, which uses a T3-type flange. See my above post for what to do.

 

[SpoOLxExO]

What manifold will fit the Greddy 95-99 TDO5H-18G?

Cant seem to find any info about it.

The kit comes with an adapter that makes the "greddy 95-99 TDO5H-18G kit" fit the orginal manifold.

Please need info.

I did read his post there, buddy. I don't know of any civic generation, that was produced from 95-99.

I know there are the 92-95's (EG) and 96-99's though.

He also made no mention of a t3 turbine flange.

I know that the 95-99 Mitsubishi GSX/ TSi GReddy Kit comes with an "Adapter" like he
mentioned. Since I have experience on the matter I suggested to forget the adapter, since it is just for clearance, not compatibility.

4g64T said he has the Civic Si 18g. Not Grinder. (The topic maker)

 

[4G64T]

thanks for your guys help i found out the hard way that it was a t3 flange but i did have an extra 14b housing laying around so i fitted it to that and it fits like a glove. you guys wouldn't happen to know the specs on the 18g would you?

 

[Steve93Talon]

4g64T said he has the Civic Si 18g. Not Grinder. (The topic maker)

Yes, and since Grinder's original post was way back in October and 4g64T re-opened the old thread, I was replying to him.