The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

what kid of hp # could i see with my td06 20g

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SlammedSliver99

20+ Year Contributor
214
0
Mar 9, 2003
Maryland, Maryland
was wondering if any one new what kind of Hp i can being puttin down with my car with the current mods i just got the Td06 20g and the 660's but look at my engine mods to see what else i have just wondering if i could be putting down 350 with prob 17psi of boost
 
You will be right at about 270-295whp range with 17psi.

I'm not sure how much the NX intercooler sprayer helps but I've heard 20whp. So possibly 300whp when using the spray.


I put down 322whp@20psi and 92 oct with my 96 GS-T: (which was MAXED out on pump gas or me at least)
HRC S20G TDO6 w/10cm housing
Full 3" Exhaust
HRC 2.25" I/C piping
Blitz BOV
Injen Intake
K&N FPIK
HKS 264/272 Cams
Clutch Masters Stg 3 Clutch
ARP head studs
NGK BPR7ES Spark Plugs
Magnacore 8.5m Spark Plug wires
RC 550 Injectors
Walboro 255HP fuel pump
SAFC
Ported 2G Manifold
Greddy 24Row FMIC

-At 17psi I put down 286whp



On my 95 GSX: 321whp at 20psi 92oct (17psi put down 285whp)
Same motor from GS-T
HRC S20G TDO6 w/10cm housing
Full 3" Exhaust (N1 System)
2.5" Short Route I/C piping
Blitz BOV
Injen Intake
K&N FPIK
HKS 264/272 Cams
ACT 2600 Clutch
ARP head studs
NGK BPR7ES Spark Plugs
Taylor 10mm Spark Plug wires
FIC 850 Injectors
Walboro 255HP fuel pump - rewired
DSMLINK V2
Ported 2G Manifold
Apexi Skyline GTR FMIC
1G TB
2G Magnus SMI


Again Maxed out on pump gas. Hense the new turbo set up which should be finished first week of July.


My friend running an SBR 20G Externally gated - with basically the same set up as my GS-T (except GTR FMIC, 1G head, 272/272) put down 330whp at 22psi 92 oct
 
True, True - tuning is the key to HP not just parts.


I have probably 110 pulls on the dyno through out my GS-T's lifespan.

The GSX has had 2 sessions on the dyno so far. - firts one was 8hrs straight (had some major knock issues going on. So we started swapping parts/checking into it, etc, right off the bat everything on the DSMLINK Set at Zero and 20psi, 266whp) Second session Very little knock 321whp. and about 1.5hrs on the dyno.


-brian
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top