2G Seats

[jayman089]

would these seats fit on my 98 eclispe gs? would they fit even though the slider adjust is on the side of the seat and these are under the front of the seat? thanks in advance.

http://www.jegs.com/webapp/wcs/stor...goryId=22889&parentCategoryId=10509&langId=-1

 

[Addicted2DSM]

Im not too keen on seats but I think you will need seat brackets. I have a set of Bride Brix II in mine, they came with the car.

 

[98DropTop]

I know this isnt answering your question, but in my opinion and prob. quite a few others APC= , save up a bit more for better quality seats that will last longer.

 

[jayman089]

alright stock it is for a while

 

[qtracerboy00]

Im not too keen on seats but I think you will need seat brackets. I have a set of Bride Brix II in mine, they came with the car.

Id have to agree with addicted,and 98droptop wish i would have saved up and not settled for a cheap brand name for seats, (tenzo R) there not the worst but if i could have a due over... this is where i would use it.

 

[jayman089]

i was only lookin at the cheap ones because i didnt want to go out and spend 800 dollars a piece on Sparco seats when i could have spent that on a nice turbo or other mods. plus right now im struggling to save enough money up for an exhaust while still doing the regular maitenance on the car along with car insurance. you know its kinda hard to blow 1200 bucks on seats with working 4 days a week at 7.25 an hour at 16 years old. sorry about the whole story thing it was no pity me pity me sotry, i just wanted to give some background on why i was tryiong to take the easy way out.

 

[qtracerboy00]

i mean if you find some like really cheap used ones or something then why not but yea,

 

[Flash]

Im not too keen on seats but I think you will need seat brackets. I have a set of Bride Brix II in mine, they came with the car.

Yea you will need brackets.
BTW, the seats you have are the fake Bride's. None the less in my opinion, can't be beat for the money.
http://www.tees-usa.com/welcome.html

 

[Livid]

You have to make custom brackets. PM me if you need more info.

So to answer your question, yes they fit, but it's not real easy, and no they don't line up with the existing ones. I had to buy sparco brackets and have them rewelded to match the bolt pattern on the APC seats, but I do like them, nice and big! If you're going with APC get the next step up like I got, the seats you picked will rip very easily.

You must be logged in to view this image or video.