The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Need HELP new stereo att wont go up!!!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mikis

Probationary Member
1
0
Dec 30, 2004
Flushing, New York
Just install a new HU on my 99 eclipse I follow all the instrutions connected all the wires but the power antenna wont go up. Does anyone know what am I doing wrong??
 
either you didnt acualy hook the power annten wire up - or there is a function on the radio to turn that circut on/off
 
did you attach it to the right wire? hook it up to the switching/amp line..usually the all blue line on universal wire harnesses...also, attach it directly to the wire leaving the deck, not through the factory harness
 
this is one of those cases when just matching the colors isn't good enough.


you should have a light blue and a blue and white stripe wire on the harness, and probably just a light blue/ blue on the radio harness.

blue w/ white is antenna, just blue is amp.
hook the blue only wire from the radio to the blue/white wire (or use a jumper) and the antenna should go up with the unit on and down when off.

if you have an amp and a power antenna, you'll have to either tie the two together, use a relay, or get a head with seperate ant and amp leads.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top