Gt30r, clears the water pipe but hits the water feed line bolt

[definitiveno]

I have a gt30r with sbr manifold, is it common that the compressor hits the feed line bolt? Ive clocked the housing every wich way with no luck. What a PITA this is being.....

 

[CanadianTSi]

My to4e 50 trim did that, Plug the water feed with a bolt and put a tee in the rubber line over by the Tstat housing and get your water from there.

 

[Staytuned]

No problems with my 3052 and stock 2G manifold.

 

[definitiveno]

Sum bi***, agitating when your not prepared for stuff. Any one know a write up for this procedure?

 

[Coup D E'Tat]

No problems with my 3052 and stock 2G manifold.

IIRC, the FP housing is designed to put the turbo out a bit so that it doesn't hit.

 

[CanadianTSi]

Sum bi***, agitating when your not prepared for stuff. Any one know a write up for this procedure?

It's not complicated, just do what I said.

 

[definitiveno]

It's not complicated, just do what I said.

I know, I just like to utilize write up's when theyre available.