Turbo Conversion

[sike]

NT - Turbo - Need some help.
Ok, I'm just about finished the install, but there are a few things I need to know before I can finish up. Sadly I only know half of what I'm doing, but I'm almost there.

#1: I have a greddy Type S blow off, theres a hose that screws into the side of it, it looks like a fish tank hose... hooks up where?

#2: The wastegate actuator vacuum hose should hook up to the intake manifold vacuum ports... correct?

#3: SFMU: Vortech SFMU: Where the hell does this thing go?

#4: Boost gauge: Where do I connect this?

Sorry for the stupid questions. My AIM SN is SikeX, I could really use some help! Thanks.

_____________________________

 

[slodsm]

#1, no idea, no experiance with that bov

#2 Yes, it will then give the wastegate a true reading without the psi drop of the intercooler. Make the hose as short as possible though

#3 No instructions? it goes after the fuel rail in the return line.

#4 you can Tee it into the same place as the wastegate line on the intake mani

 

[sike]

Thanks, generally where does the BOV hook too?

 

[slodsm]

It bolts onto the upper intercooler pipe just before the T body, also have a vacuum line that goes to the mani

 

[sike]

I mean the hose.

 

[Turbo 420a]

The hose is the vacuum line. And you can just use a tee fitting to connect it together with another vacuum line up by the intake manifold.