Kryotreating

[Boosted420a]

My bottom end is in the shop now building the bottom end. One thing that i hadnt done is anything to the stock crank. Has anyone built the bottom end without touchin the crank? I know for sure that i should kryotreat it to strenghten it but money is the bi*** of all evils and i have no idea how strong the N/A crank is. Holla back so i know to send it out or not.. i probably can get it done for a buck and a quarter which isnt to bad

 

[Kirby]

If you want then send it out. You don't need too though, there are guy's running 400HP+ on the stock untreated crank.

 

[HadesOmega]

our cranks are awesome I've never heard of anyone busting one up besides getting rod knock and stuff. Thats one tuff mofo

 

[Boosted420a]

So pushin the 15-20 psi i am gonna run you dont think the crank should have a problem.. only reason i ask is that it would be the weak part of the bottom end ...ya heard!! Anyways good to know that it's not some weak ass shiznit like the pistons are under boost..... It's also good to know it is da bomb knowing that my money is on the low end right now. works fer me yall...

 

[siueclipse]

i didn't treat my crank..

hehe.. crank.