Dual Exhaust

[GofaST4life]

I like it a lot. It doesnt look overplayed.

 

[xreaction122]

I love it!
care to shoot us a video just to hear what its like?

 

[nuclearr]

I like the eay it looks on the ground. But I do not like how you used just strait pipe to make the bends not efficent. At least you used much larger pipe than you need.

 

[cardot33]

I gotta say, I love that dual exhaust set up. It looks like it's supposed to be there, not like a ricer fart can (I used to have one on my talon, I admit) just hanging off the back of the car, making nasty noise. Maybe someday I'll do something similar on my 1g. It reminds me of what I was going to do with my camaro, that has a muffler with single inlet and dual outlet (might work on a dsm?). I for sure need an external wastegate before playing with exhaust though, boost creep will kill me otherwise. How is the ground clearance with that set up?

 

[blackGSX2g]

Well I can say I was expecting something completely different when I clicked on this thread. I don't want to like it, but I actually kinda do. Gives the rear end a different look. Definately something that I haven't seen before, and steps out of the box. That and I HATE the canister style mufflers. They look way tacky, so props for not sticking two of those on.

I only see where you have 1 muffler (guessing the large canister before the split was your old muffler), just straight pipe from there? I'm interested to see how it sounds also. Post up some vids!

 

[talonsteve25]

Yeah i just cut up the old can and reused it workes good doesnt look bad ither!

spawn87- my car is awd

The ground clearence is not a problem iv went over a bad speed bump to check out and it was fine, ill post a vid to soon as i get time to! it sounds better than before imo it lost the hollow pipe sound and like i said strangly becomes silent at 3k.

Reciently i painted the pipes black so the police wont have any question and cut the tips at an angle so blend with the bumper much better. 100+ km and its still fine hasnt hit the driveshaft or come loose. And thanks for all the comments

 

[endeffect0]

.. they know its pointless , But to people that dont know it could look factory, and i still have to angle the pipe/tips so it is flush with the bumper? I dunno at the very least i became a bit better of a welder haha.

I love this. It looks great man. Yea.. its a looks mod. But You did it your self hell just for the challenge almost.
It really makes the car look like it belongs to the sports car family. i dig it.

I got my car with a full 3 inch turbo back greddy unit. I love the sound and the spool.. . but it still has a big round muffler hanging off the back, its not a can tip .. but i still dont like it.

I wish i could justify something like this.. but yea AWD their no way. maybe i can just move my muffler inboard some and do a normal tip. sigh: ill think of something i guess.

 

[spawn87]

Yeah i just cut up the old can and reused it workes good doesnt look bad ither!

spawn87- my car is awd

The ground clearence is not a problem iv went over a bad speed bump to check out and it was fine, ill post a vid to soon as i get time to! it sounds better than before imo it lost the hollow pipe sound and like i said strangly becomes silent at 3k.

Reciently i painted the pipes black so the police wont have any question and cut the tips at an angle so blend with the bumper much better. 100+ km and its still fine hasnt hit the driveshaft or come loose. And thanks for all the comments

OH WOW thats great can you send me some pics of different angels of the canister how you mounted it on cause i have a thermal R&D canister and i think it might fit cause i totally wana do that now and pls post a vid i hope you dont mind but i wana do that same thing as you.

 

[TalonJohn94]

I usually hate dual exhaust on 4-cylinder cars, but I like this. The "subtlety" in which you have the tips appearing makes all the difference.

Plus, didn't the black 1GB Eclipse (Dan Cokic) from the Ultimate Street Car Challenge the Sport Compact Car Magazine put on a few years ago have 3.5 inch dual exhaust that was actually ... functional?

 

[talonalex92]

I like it dood. Came out purtty clean.

 

[miniturbo23]

looks ok, I mean it dont look bad or dumb but I wouldnt trade that for what I have now. SRT-4s are cheap now I would just get one that way you can really represent Mopar..

 

[talonsteve25]

YouTube - Eagle talon

Alright heres the video finally.. Ill take some pictures to next time shes on blocks again.

 

[nytescion]

you now sound similar to a srt4 <p> <object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/iLcjAcyeS1I&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/iLcjAcyeS1I&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[spawn87]

that sounds great and looks good... what kind of canister did you use?

 

[99 GST-R]

Wow... It sounds amazing. The dual setup was meant to be on the GS-Ts and AWDs. New Evos and just about ever other car on the market is running a dual system. Why shouldn't our Dsms? As long as its done as cleanly as yours, without dual watermelon launchers. Did you use an APEXi N1 or GT canister? I really like the idea of a 3k drop off you spoke of. I get to drive alot above 60mph here in Kansas, so the drone/noise is bugging me alot more than it use to. I wonder how the sound and loudness would be affected by moving the muffler closer to the engine if there is room?

 

[Rob10_99]

Dayum!

You must be logged in to view this image or video.

 

[brandnew161]

i like it man good job. Looks good. I honestly like that setup better than my big ass fart can sittin low on the ground

 

[jacobevan611]

my god it sounds and looks absolutely amazing.

 

[talonsteve25]

Thanks for the good comments guys! never thought it would be popular.

99 GST-R: i used a cheap megan can ($150) that i had on it from before, and i could see the placement changing the exhaust sound. They probly would be room right where the cat use to be but thats right into the down pipe.

 

[9!'clipseDOHC]

Sounds great!

 

[ian_maham]

I like it, now all you have to do is make it a ture daul exhaust. Custom exhaust manifold, two downpipes, and two mufflers. Shouldn't be too hard and expensive, right?

 

[Kickerbeast]

This may be a spring project for my 1G

 

[untouchablecc]

Hey my drive shaft goes there

 

[asrdave]

definitely reminds me of my srt-4 i love it i am about to buy a gst just to do this, cause it reminds me of my old car =)

 

[FUNWHEELDRIVE]

im from calgary too and that exhaust looks pretty nice