The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

shims

  1. XC92

    Question about solder method to determine proper shim thicknesses (updated with numbers doing it the right way, 2 passes now)

    So I got my stacks reassembled with new parts and did the solder method yesterday, but many of the measured values seemed way off. Then I realized that I might have done it wrong.What I did was first install all new or removed bottom (closest to clutch/engine/bellhousing) races into the case...
    • XC92
    • Thread
    • 1g dsm manual transmission poppets shims solder method
    • Replies: 29
    • Forum: Drivetrain Tech
  2. 3VOLUTIONIST

    W5M33 Shim Thicknesses

    Hey guys!So i'm building my box at the moment and I've just run through and done a set of solder crush tests using soft 3mm solder as instructed by the transmission service manual. This box had seen ~80 thousand miles before I removed it due to the crankwalk bolt stripping the thread out of...
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community
Back
Top